rsc3/doc-schelp/HelpSource/Tutorials/Streams-Patterns-Events6.schelp

title:: Understanding Streams, Patterns and Events - Part 6
summary:: Parallel Patterns
related:: Tutorials/Streams-Patterns-Events1, Tutorials/Streams-Patterns-Events2, Tutorials/Streams-Patterns-Events3, Tutorials/Streams-Patterns-Events4, Tutorials/Streams-Patterns-Events5, Tutorials/Streams-Patterns-Events7
categories:: Tutorials>Streams-Patterns-Events

section::Parallel Patterns

subsection::Ppar

The link::Classes/Ppar:: pattern allows you to merge multiple event streams to play in parallel.

Ppar is a link::Classes/ListPattern:: and so like most ListPatterns it takes two arguments, a strong::list:: of event patterns to play in parallel and a strong::repeats:: count.

Ppar's child patterns must be event patterns. Using value patterns in a Ppar is an error because value patterns contain no duration data.

A Ppar is done when all of its subpatterns are done.

code::
(
Ppar([
	Pbind(\dur, 0.2, \midinote, Pseq([62, 65, 69, 72], inf)),
	Pbind(\dur, 0.4, \midinote, Pseq([50, 45], inf))
]).play
)


(
// Ppars can be nested
Ppar([
	Pbind(
		\dur, Prand([0.2, 0.4, 0.6], inf),
		\midinote, Prand([72, 74, 76, 77, 79, 81], inf),
		\db, -26,
		\legato, 1.1
	),
	Pseq([
		Pbind(\dur, 3.2, \freq, Pseq([\rest]) ),
		Prand([
			Ppar([
				Pbind(\dur, 0.2, \pan,  0.5, \midinote, Pseq([60, 64, 67, 64])),
				Pbind(\dur, 0.4, \pan, -0.5, \midinote, Pseq([48, 43]))
			]),
			Ppar([
				Pbind(\dur, 0.2, \pan,  0.5, \midinote, Pseq([62, 65, 69, 65])),
				Pbind(\dur, 0.4, \pan, -0.5, \midinote, Pseq([50, 45]))
			]),
			Ppar([
				Pbind(\dur, 0.2, \pan,  0.5, \midinote, Pseq([64, 67, 71, 67])),
				Pbind(\dur, 0.4, \pan, -0.5, \midinote, Pseq([52, 47]))
			])
		], 12)
	], inf)
], inf).play;
)
::

subsection::Ptpar

The link::Classes/Ppar:: pattern starts all of its subpatterns at the same time.

A link::Classes/Ptpar:: pattern includes a start time parameter before each subpattern which allow the subpatterns to be started at some time delay within the pattern. The start time is given in beats.

code::
(
var makePattern, durpat;

durpat = Pseq([ Pgeom(0.05, 1.1, 24), Pgeom(0.5, 0.909, 24) ], 2);

makePattern = { arg note, db, pan;
	Pbind( \dur, durpat, \db, db, \pan, pan, \midinote, Pseq([note, note-4], inf) );
};

Ptpar([
	0.0, makePattern.value(53, -20, -0.9),
	2.0, makePattern.value(60, -23, -0.3),
	4.0, makePattern.value(67, -26,  0.3),
	6.0, makePattern.value(74, -29,  0.9)
], inf).play;
)
::

The time arguments are sent the code::value:: message when the Ptpar pattern is started, so you may use functions to specify the times.

code::
(
var makePattern, durpat;

durpat = Pseq([ Pgeom(0.05, 1.1, 24), Pgeom(0.5, 0.909, 24) ], 2);

makePattern = { arg note, db, pan;
	Pbind( \dur, durpat, \db, db, \pan, pan, \midinote, Pseq([note, note-4], inf) );
};

Ptpar([
	{ 0.0 }, makePattern.value(53, -20, -0.9),
	{ 8.0.rand }, makePattern.value(60, -23, -0.3),
	{ 8.0.rand }, makePattern.value(67, -26,  0.3),
	{ 8.0.rand }, makePattern.value(74, -29,  0.9)
], inf).play;
)
::

section::FilterPatterns and transformation

FilterPatterns take an existing pattern and apply some modification to its properties.

subsection::Padd, Pmul, Pset, Pstretch

There is a simpler way to write the modal transposition example given in part 5. In fact the earlier examples are setting the values of code::mtranspose:: and code::ctranspose:: which is not the best way to change those variables, because it wipes out any modifications to them by parent patterns. It is better to take the current value of those properties and add a value to them.

The link::Classes/Padd:: filter takes the current value of a property and adds a value to it.

code::
(
// modal transposition
var pattern;

// define the basic pattern
pattern = Pbind(
	\dur, 0.15,
	\degree, Pseq([ Pshuf(#[-7,-3,0,2,4,7], 4), Pseq([0,1,2,3,4,5,6,7]) ], 1)
);

Pseq([
	pattern,		// untransposed
	Padd(\mtranspose, 1, pattern),	// modal transpose up 1 degree
	Padd(\mtranspose, 2, pattern)	// modal transpose up 2 degrees
], inf).play
)
::

Similarly, link::Classes/Pmul:: multiplies the current value of a property by a value. link::Classes/Pset:: sets the property to a value.

In order to process duration correctly link::Classes/Pstretch:: should be used.

code::
(
// beat stretching using Pstretch
var pattern;

// define the basic pattern
pattern = Pbind(
	\dur, 0.15,
	\degree, Pseq([ Pshuf(#[-7,-3,0,2,4,7], 4), Pseq([0,1,2,3,4,5,6,7]) ], 1)
);

Pseq([
	pattern,		// normal
	Pstretch(0.5, pattern),	// stretch durations by a factor of 1/2
	Pstretch(2.0, pattern)	// stretch durations by a factor of 2
], inf).play
)
::

subsection::Paddp, Pmulp, Psetp, Pstretchp

In fact there is an even shorter version of the modal transposition example. link::Classes/Paddp:: reads one pattern to get values for adding to a property and plays the second pattern once through modified with each new value.

code::
(
// modal transposition
var pattern;

// define the basic pattern
pattern = Pbind(
	\dur, 0.15,
	\degree, Pseq([ Pshuf(#[-7,-3,0,2,4,7], 4), Pseq([0,1,2,3,4,5,6,7]) ], 1)
);

Paddp(
	\mtranspose,		// property to be modified
	Pseq([0,1,2], inf),	// a value pattern as a source of values for adding to mtranspose
	pattern			// the pattern to be modified
).play
)
::

Nested modifications:

code::
(
// modal transposition
var pat1, pat2;

// define the basic pattern
pat1 = Pbind(
	\dur, 0.15,
	\degree, Pseq([ Pshuf(#[-7,-3,0,2,4,7], 4), Pseq([0,1,2,3,4,5,6,7]) ], 1)
);

pat2 = Paddp(
	\mtranspose,	// property to be modified
	Pseq([0,1,2]),	// a value pattern as a source of values for adding to mtranspose
	Ppar([
		pat1,
		Padd(\mtranspose, -3, pat1),	// down a 4th
		Padd(\mtranspose, 2, pat1)	// up a 3rd
	])
);

Pseq([
	pat1,	// unmodified pattern
	pat2,	// parallel sequence
	Pstretch(1.5, pat2)	// parallel sequence stretched by 3/2
], inf).play
)
::

Another example using Paddp:

code::
(
var chord;
chord = Prand([[53, 58, 64],[53, 60, 64],[57,60,65]]);
Paddp(\ctranspose, Prand([-1,0,2,4,5], inf),
	Ppar([
		Pbind(	// melody part
			\dur, Prand([0.2, 0.4, 0.6], inf),
			\midinote, Pxrand([71, 72, 74, 76, 77, 79], 10),
			\db, -26,
			\legato, 1.1
		),
		Pbind(	// harmony part
			\pan, 0.4,
			\dur, Pseq([0.1, 0.5, 0.4, 0.6], 4),
			\midinote, Pseq([chord,\rest,chord,\rest], 4)
		),
		Pbind(	// bass part
			\pan, -0.4,
			\dur, 0.4,
			\midinote, Pseq([38, 45, 38, 36], 4)
		)
	])
).play
)


(
// chromatic transposition
var pattern;

// define the basic pattern
pattern = Pbind(
	\dur, 0.1,
	\degree, Pseq([0,1,2,3,4,5,6,7])
);

Paddp(
	\ctranspose,		// property to be modified
	Pseries(0,1,12),	// a value pattern as a source of values for multiplying with ctranspose
	pattern			// the pattern to be modified
).play
)


(
// beat time stretching
var pattern;

// define the basic pattern
pattern = Pbind(
	\dur, 0.1,
	\degree, Pseq([0,1,2,3,4,5,6,7])
);

Pstretchp(
	Pseq([1,2,3], inf),	// a value pattern as a source of values for multiplying with stretch
	pattern			// the pattern to be modified
).play
)
::

subsection::Pbindf

link::Classes/Pbindf:: is like link::Classes/Pbind:: except that it merges all the bound symbols into events that it gets from a subpattern. It takes the same initial arguments in pairs as Pbind does, with an additional pattern to be modified as the last argument.

code::
(
var pattern;
pattern = Pbind( \midinote, Pseq(#[60, 62, 64, 65, 67, 69, 71, 72]) );

Pseq([
	Pbindf(pattern, \legato, 0.1, \dur, 0.2),
	Pbindf(pattern, \legato, 1.0, \dur, 0.125),
	Pbindf(pattern, \legato, 2.0, \dur, 0.3)
], inf).play
)
::

Patterns can be used as the arguments to Pbindf.

code::
(
var pattern;
pattern = Pbind( \midinote, Pseq(#[60, 62, 64, 65, 67, 69, 71, 72, 74, 76, 77, 79]) );

Pseq([
	Pbindf(pattern,\legato, 0.1, \dur, Pgeom(0.3, 0.85, inf)),
	Pbindf(pattern,\legato, 1.0, \dur, Pseq([0.3, 0.15], inf)),
	Pbindf(pattern,\legato, 2.0, \dur, Pseq([0.2, 0.2, 0.4], inf))
], inf).play
)
::

To go to the next file:
link::Tutorials/Streams-Patterns-Events7::