rsc3/doc-schelp/HelpSource/Classes/MFCC.schelp

class:: MFCC
summary:: Mel frequency cepstral coefficients
categories:: UGens>Analysis
related:: Classes/BeatTrack, Classes/Loudness, Classes/Onsets, Classes/Pitch, Classes/KeyTrack

description::
Generates a set of MFCCs; these are obtained from a band-based frequency representation (using the Mel scale by default), and then a discrete cosine transform (DCT). The DCT is an efficient approximation for principal components analysis, so that it allows a compression, or reduction of dimensionality, of the data, in this case reducing 42 band readings to a smaller set of MFCCs. A small number of features (the coefficients) end up describing the spectrum. The MFCCs are commonly used as timbral descriptors.

Output values are somewhat normalised for the range 0.0 to 1.0, but there are no guarantees on exact conformance to this. Commonly, the first coefficient will be the highest value.

classmethods::
method:: kr

argument:: chain
[fft] Audio input to track, which has been pre-analysed by the FFT UGen; see examples below for the expected FFT size.
argument:: numcoeff
[s] Number of coefficients, defaults to 13, maximum of 42; more efficient to use less of course!

returns:: code::#coeff1, coeff2, ...::

examples::
code::
// Technical note: The 0th coefficient is not generated as it consists of multiplying all bands by 1 and summing


// assumes hop of half fftsize, fine
b = Buffer.alloc(s, 1024, 1); // for sampling rates 44100 and 48000
//b = Buffer.alloc(s, 2048, 1); // for sampling rates 88200 and 96000

d = Buffer.read(s, Platform.resourceDir +/+ "sounds/a11wlk01.wav");


(
x = {
var in, fft, array;

//in = PlayBuf.ar(1, d, BufRateScale.kr(d), 1, 0, 1);

in = SoundIn.ar(0);

fft = FFT(b, in);

array = MFCC.kr(fft);

array.size.postln;

Out.kr(0, array);

Out.ar(0,Pan2.ar(in));
}.play
)


c = Bus.new('control', 0, 13);

// poll coefficients
c.getn(13, { arg val; { val.plot; }.defer });


// Continuous graphical display of MFCC values; free routine before closing window

(
var ms;

w = Window.new("Thirteen MFCC coefficients", Rect(200, 400, 300, 300));

ms = MultiSliderView.new(w, Rect(10, 10, 260, 280));

ms.value_(Array.fill(13, 0.0));
ms.valueThumbSize_(20.0);
ms.indexThumbSize_(20.0);
ms.gap_(0);

w.front;

r = {

inf.do{

c.getn(13, { arg val; { ms.value_(val * 0.9) }.defer });

0.04.wait; // 25 frames per second
};

}.fork;

)


// tidy up
(
r.stop;
b.free;
c.free;
x.free;
w.close;
)
::

Research notes: Drafts of an MFCC UGen were prepared by both Dan Stowell and Nick Collins; their various ideas are combined here in a cross platform compatible UGen. Mel scale spacing with triangular crossfade overlap is used by default for the bands, approximately tracking the human critical band spacing and bandwidth. Variants such as BFCC (Bark) and EFCC (ERB) given similar results in practice; the Mel scale as used here is the standard as adapted from the speech recognition literature and now applied in music information retrieval.

code::
// Calculating Mel Scale Bands; allow up to 42 coefficients, so up to 42 bands
// first part of this code adapted from Dan Stowell and Jamie Bullock Mel scale implementation
// could later add Bark and ERB options, and possibility of buffer of data to be passed to the UGen for alternative freq warpings
(
var mel_freq_max, mel_freq_min, freq_bw_mel, freq_bands, freq_max, freq_min;
var mel_peak, lin_peak, fft_peak;
var freqperbin;
var fftbinstart, fftbinend, fftbinmult, fftbincumul;
var pos, tmp;
var sr, fftsize, halffftsize;
var whichbandscale, lintoscale, scaletolin;

freq_max = 18000;
freq_min = 80;
sr = 48000; //44100;
fftsize = 1024;
halffftsize = fftsize.div(2);
freq_bands = 42;

//whichbandscale = 0; // 0 = mel; 1 = bark (CB) 2 = ERB
//
//lintoscale = {arg freq;
//switch(whichbandscale,0,{1127 * log(1 + (freq / 700))}, 1, {}, 2, {}).value
//};
//scaletolin = {arg scalepos;
//switch(whichbandscale, 0, {700 * (exp(scalepos / 1127.0) -1);}, 1, {}, 2, {}).value
//};

lintoscale = {arg freq;
1127 * log(1 + (freq / 700))
};
scaletolin = {arg scalepos;
700 * (exp(scalepos / 1127.0) -1);
};

mel_freq_max = lintoscale.value(freq_max); // 1127 * log(1 + (freq_max / 700));
mel_freq_min = lintoscale.value(freq_min); //1127 * log(1 + (freq_min / 700));
freq_bw_mel = (mel_freq_max - mel_freq_min) / freq_bands;

[mel_freq_max, mel_freq_min, freq_bw_mel].postln;

mel_peak = Array.fill(freq_bands + 2, {0.0});
lin_peak = Array.fill(freq_bands + 2, {0.0});
fft_peak = Array.fill(freq_bands + 2, {0.0});

freqperbin = sr / fftsize; // SR/N

mel_peak[0] = mel_freq_min;
lin_peak[0] = freq_min; // === 700 * (exp(mel_peak[0] / 1127) - 1);
fft_peak[0] = (lin_peak[0] / freqperbin).asInteger;

for(1, freq_bands + 1,{|n|

 mel_peak[n] = mel_peak[n - 1] + freq_bw_mel;
 lin_peak[n] = scaletolin.value(mel_peak[n]); // 700 * (exp(mel_peak[n] / 1127.0) -1);
 fft_peak[n] = ((lin_peak[n] / freqperbin).asInteger).min(halffftsize); // fft size //rounds down here

});

//Post << mel_peak << nl;
//Post << lin_peak << nl;
//Post << fft_peak << nl;

//  [2 / (lin_peak[freq_bands + 1] - lin_peak[freq_bands-1]), 1.0 / (2 / (lin_peak[2] - lin_peak[0]))].postln;

fftbinstart = Array.fill(freq_bands, {0});
fftbinend = Array.fill(freq_bands, {0});
fftbincumul = Array.fill(freq_bands+1, {0});
fftbinmult = [];

pos = 0;

freq_bands.do {|i|

	//var normmult=1.0; // preserve power, don't modify band power by area
	var startbin, endbin, numbins, averager;

	if(i == 0,{
	startbin = 0;
	endbin = fft_peak[i + 1] - 1;
	},{
	startbin = fft_peak[i - 1] + 1;
	endbin = fft_peak[i + 1] - 1;
	});

	numbins = endbin - startbin + 1;
	averager = 1.0 / numbins;

	// linear crossfade (intended in power) between consecutive band centres

	tmp = fft_peak[i] - startbin;

	// could divide by averager but I'm not convinced by the perceptual necessity for this?
	// ie fftbinmult = fftbinmult ++ (Array.series(tmp + 1, 1.0 / (tmp + 1), 1.0 / (tmp + 1)) * averager);

	fftbinmult = fftbinmult ++ (Array.series(tmp + 1, 1.0 / (tmp + 1), 1.0 / (tmp + 1)));

	tmp= endbin- (fft_peak[i]);

	fftbinmult = fftbinmult ++ (Array.series(tmp, 1.0 + ((-1.0) / (tmp + 1)), (-1.0) / (tmp + 1)));

	fftbinstart[i] = startbin;
	fftbinend[i] = endbin;
	fftbincumul[i] = pos;

	pos = pos + (endbin - startbin + 1);
};

fftbincumul[freq_bands] = pos - 1;

Post << fftbinstart << nl;
Post << fftbinend << nl;
Post << fftbincumul << nl;
Post << fftbinmult << nl;

)


// future work: see http://www.ling.su.se/STAFF/hartmut/bark.htm

// Barks
a = (26.81 / (1 + (1960 / ((100, 200..22000))))) - 0.53;
a.plot;

// ERBs (rough calculation, only really valid under 6000Hz, real scale goes up to 42 rather than 37 in 22000 Hz)
a = Array.fill(220,{|i| var f; f = i * 100; 11.17 * log((f + 312) / (f + 14675)) + 43.0});
a.plot

// generating DCT coefficients
// don't generate i=0 coefficient since it
a = Array.fill(42, {|i| cos(pi / 42.0 * ((0..41) + 0.5) * (i + 1))});
Post << a.flatten << nl;
::